Title | Laser powder bed fusion of copper matrix iron particle reinforced nanocomposite with high strength and high conductivity |
Author | |
Corresponding Author | Zhang, Ming-Xing |
Publication Years | 2023-01-20
|
DOI | |
Source Title | |
ISSN | 1005-0302
|
Volume | 134Pages:50-59 |
Abstract | Liquid-liquid phase separation, and the resulted solute segregation, during conventional solidification have been a long-term challenge to produce copper (Cu)-iron (Fe) immiscible composites with high strength and high conductivity. The present work reports an effective solution to this issue through laser powder bed fusion (L-PBF) in-situ alloying of Cu-8 wt.% Fe. Microstructure observation showed that the fast cooling within micron-scale melt pools fully eliminated the Fe segregation and therefore the L-PBF fabricated nanocomposite achieved the homogeneous microstructure, which featured equiaxed fine grains around 1 µm in size. Ageing of the nanocomposite at 600°C for 1 h enabled precipitation of two types of nanoparticles. One is coarser Fe nanoprecipitates with body-centered cubic (BCC) structure and diameter of 100-300 nm, mainly distributing along grain boundaries. The other is smaller Fe nanoprecipitates with face-centered cubic (FCC) structure and diameter of 10-35 nm, being observed within the grains and having coherent interfaces with the Cu matrix. As a result, the aged Cu-Fe nanocomposite achieved tensile strength of 462.9±6.6 MPa with 30.4%±1.7% elongation to failure and 74.5% IACS (International Annealed Copper Standard) electrical conductivity. The formation mechanisms of the nanoprecipitates and the strengthening mechanisms of the nanocomposite are discussed.
© 2022 |
Indexed By | |
Language | English
|
SUSTech Authorship | Others
|
Funding Project | The authors from The University of Queensland thank Australian Microscopy & Microanalysis Research Facility at the Centre for Microscopy and Microanalysis (CMM), The University of Queensland for the facilities and technical assistance. The authors from The University of Queensland thank Australia Research Council Discovery Project (No. DP210103162) program for funding support.
|
WOS Accession No | WOS:000830896400006
|
Publisher | |
EI Accession Number | 20223012421574
|
EI Keywords | Binary alloys
; Copper alloys
; Crystal structure
; Grain boundaries
; High strength alloys
; Iron alloys
; Metallic matrix composites
; Phase separation
; Precipitation (chemical)
; Segregation (metallography)
; Tensile strength
; Textures
|
ESI Classification Code | Metallurgy and Metallography:531
; Metallurgy:531.1
; Metallography:531.2
; Copper Alloys:544.2
; Iron Alloys:545.2
; Thermodynamics:641.1
; Nanotechnology:761
; Chemical Operations:802.3
; Solid State Physics:933
; Crystal Lattice:933.1.1
|
ESI Research Field | MATERIALS SCIENCE
|
Data Source | EV Compendex
|
Citation statistics |
Cited Times [WOS]:0
|
Document Type | Journal Article |
Identifier | http://kc.sustech.edu.cn/handle/2SGJ60CL/395679 |
Department | Department of Materials Science and Engineering |
Affiliation | 1.School of Mechanical and Mining Engineering, The University of Queensland, St. Lucia; QLD 4072, Australia 2.Department of Materials Science and Engineering and Shenzhen Key Laboratory for Additive Manufacturing of High-performance Materials, Southern University of Science and Technology, Shenzhen; 518055, China 3.School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an; 710072, China |
Recommended Citation GB/T 7714 |
Liu, Yingang,Zhang, Jingqi,Sun, Qiang,et al. Laser powder bed fusion of copper matrix iron particle reinforced nanocomposite with high strength and high conductivity[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2023,134:50-59.
|
APA |
Liu, Yingang.,Zhang, Jingqi.,Sun, Qiang.,Li, Meng.,Yan, Ming.,...&Zhang, Ming-Xing.(2023).Laser powder bed fusion of copper matrix iron particle reinforced nanocomposite with high strength and high conductivity.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,134,50-59.
|
MLA |
Liu, Yingang,et al."Laser powder bed fusion of copper matrix iron particle reinforced nanocomposite with high strength and high conductivity".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 134(2023):50-59.
|
Files in This Item: | There are no files associated with this item. |
|
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment