Fabrication of open-pore SiC parts using powder injection molding
Porous SiC parts were fabricated via powder injection molding, during which the parts were consolidated using negative pressure sintering (NPS) and positive pressure sintering (PPS). Both sintering technologies successfully produce interconnected micro-size pore structures in the sintered SiC parts. Compared to the NPSed part, the SiC particles found in the PPSed part have a more uniformly-distributed particle size and better developed sintering necks, thus imparting higher mechanical properties to the porous SiC part.
First ; Corresponding
|Document Type||Conference paper|
|Department||Department of Materials Science and Engineering|
1.Shenzhen Key Laboratory of Nanoimprint Technology,Department of Materials Science and Engineering,South University of Science and Technology of China,Shenzhen,518055,China
2.State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology,Wuhan,430081,China
|First Author Affilication||Department of Materials Science and Engineering|
|Corresponding Author Affilication||Department of Materials Science and Engineering|
|First Author's First Affilication||Department of Materials Science and Engineering|
Yu，Kaiping,Lv，Yonghu,Chen，Peng,et al. Fabrication of open-pore SiC parts using powder injection molding[C],2016.
|Files in This Item:||There are no files associated with this item.|
|Recommend this item|
|Export to Endnote|
|Export to Excel|
|Export to Csv|
|Similar articles in Google Scholar|
|Similar articles in Baidu Scholar|
|Similar articles in Bing Scholar|
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.