| Title | Fatigue of octet-truss lattices manufactured by Laser Powder Bed Fusion |
| Author | |
| Corresponding Author | Li, Yifan |
| Publication Years | 2023-05-01
|
| DOI | |
| Source Title | |
| ISSN | 0142-1123
|
| EISSN | 1879-3452
|
| Volume | 170 |
| Abstract | The octet-truss lattice is a three-dimensional lattice with high strength and low density. Practical use of these lattices requires a knowledge of their resistance to fatigue crack growth. Lattice specimens manufactured by laser powder bed fusion technique were prepared with different orientations to explore the orientation effects on lattice fatigue behaviour. X-ray tomography was used to measure the surface roughness of the lattice struts, and also used to validate the accuracy of the crack length measurement by compliance method. The experimental results show that the fatigue crack growth rate and crack growth path depend on the orientation of the lattice. A finite element prediction of the fatigue life of the lattice was carried out, based on measurements of the fatigue life of single struts cut from the lattice. The finite element predictions were in good agreement with the experimental results. A procedure for predicting the crack growth path was proposed. These findings can help designers optimize the orientation of lattice structures in structural applications. |
| Keywords | |
| URL | [Source Record] |
| Indexed By | |
| Language | English
|
| SUSTech Authorship | Corresponding
|
| WOS Research Area | Engineering
; Materials Science
|
| WOS Subject | Engineering, Mechanical
; Materials Science, Multidisciplinary
|
| WOS Accession No | WOS:000922452800001
|
| Publisher | |
| ESI Research Field | MATERIALS SCIENCE
|
| Scopus EID | 2-s2.0-85149784429
|
| Data Source | Web of Science
|
| Citation statistics |
Cited Times [WOS]:1
|
| Document Type | Journal Article |
| Identifier | http://kc.sustech.edu.cn/handle/2SGJ60CL/475088 |
| Department | Department of Mechanics and Aerospace Engineering |
| Affiliation | 1.Univ Bristol, Dept Mech Engn, Queens Bldg,Univ Walk, Bristol BS8 1TR, England 2.Univ Birmingham, Sch Met & Mat, Birmingham B15 2TT, England 3.Southern Univ Sci & Technol, Dept Mech & Aerosp Engn, Shenzhen 518055, Guangdong, Peoples R China |
| First Author Affilication | Department of Mechanics and Aerospace Engineering |
| Corresponding Author Affilication | Department of Mechanics and Aerospace Engineering |
| Recommended Citation GB/T 7714 |
Li, Yifan,Attallah, Moataz M.,Coules, Harry,et al. Fatigue of octet-truss lattices manufactured by Laser Powder Bed Fusion[J]. INTERNATIONAL JOURNAL OF FATIGUE,2023,170.
|
| APA |
Li, Yifan,Attallah, Moataz M.,Coules, Harry,Martinez, Rafael,&Pavier, Martyn.(2023).Fatigue of octet-truss lattices manufactured by Laser Powder Bed Fusion.INTERNATIONAL JOURNAL OF FATIGUE,170.
|
| MLA |
Li, Yifan,et al."Fatigue of octet-truss lattices manufactured by Laser Powder Bed Fusion".INTERNATIONAL JOURNAL OF FATIGUE 170(2023).
|
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
;
Edit Comment