Title | 基于模态分解的风力机尾迹特征研究 |
Alternative Title | Spatial-Temporal Evolution Characteristics of Wind Turbine Wake Based on Mode Decomposition Method
|
Author | |
Publication Years | 2022
|
DOI | |
Source Title | |
ISSN | 0254-0053
|
Volume | 43Issue:4Pages:896-907 |
Abstract | 水平轴风力机的尾迹对风电性能和下游风力机疲劳载荷有重要影响.本文采用致动线模型(Actuator line method,ALM)的大涡模拟方法(Large-eddy simulation,LES)研究了 NREL-5MW风力机尾迹的时空演化特征.从获得的瞬时场可以看出叶尖涡向下游发展后变成涡环,涡环失稳产生大量涡丝,涡丝重连生成小尺度涡环,小尺度涡环进一步破碎成更小的湍流结构.从平均场可以看出来流经过风力机后,速度发生台阶式降低,速度亏损剖面形状为W形.随着尾迹向下游发展,尾迹速度逐渐恢复且湍流强度逐渐增大,直至风力机后5个转子直径处速度亏损剖面的形状变为U形,但湍流强度的峰值开始降低.通过本征正交分解方法(Proper orthogonal decomposition,POD)和动力学模态分解方法(Dynamic mode decomposition,DMD)分析发现,风力机尾迹演化过程中叶片旋转的相关模态、涡环模态都可以被很好地捕捉到. |
Keywords | |
URL | [Source Record] |
Language | Chinese
|
SUSTech Authorship | Others
|
Funding Project | 11972220:国家自然科学基金
; 2019B121203001:广东省重点实验室基金
|
Data Source | WanFang
|
WanFangID | lxjk202204016
|
Citation statistics |
Cited Times [WOS]:0
|
Document Type | Journal Article |
Identifier | http://kc.sustech.edu.cn/handle/2SGJ60CL/525046 |
Department | Southern University of Science and Technology |
Affiliation | 1.上海大学力学与工程科学学院,上海200444 2.上海市应用数学和力学研究所,上海200444 3.南方科技大学广东省湍流基础研究与应用重点实验室,广东深圳518055 |
Recommended Citation GB/T 7714 |
刘明,王伯福. 基于模态分解的风力机尾迹特征研究[J]. 力学季刊,2022,43(4):896-907.
|
APA |
刘明,&王伯福.(2022).基于模态分解的风力机尾迹特征研究.力学季刊,43(4),896-907.
|
MLA |
刘明,et al."基于模态分解的风力机尾迹特征研究".力学季刊 43.4(2022):896-907.
|
Files in This Item: | There are no files associated with this item. |
|
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment